These valves assistance to control the flow of liquid from the pipes | Forum

Topic location: Forum home » General » General Chat
lubcasben Nov 13 '19
Gate valves are prepared for fully open or fully closed service. They are positioned in pipelines as isolating valves, and really should not be used as control or regulating valves here . Operation of the gate valve is carried out doing an either clockwise to shut (CTC) or clockwise to start (CTO) rotating motion from the stem. When operating the valve stem, the gate moves up- or downwards for the threaded part with the stem.

Gate valves are sometimes used when minimum pressure loss and also a free bore is necessary. When fully open, a normal gate valve doesn't have any obstruction inside the flow path causing a very low pressure loss, this also design means that we can use a pipe-cleaning pig. A gate valve can be a multiturn valve which means that the operation from the valve is performed by means of an threaded stem. As the valve should turn many times to go from offered to closed position, the slow operation also prevents water hammer effects.

The frequent lowering and raising is time-consuming since you should fully open or close it. Gate valves require some quantity of space for opening. In addition to this, due to the high dimensions, it more space for installation.
The entire structure is fairly complex. It generally features two sealing surfaces helping to make its functioning, polishing and maintenance quite complicated. It has many components helping to make maintenance and manufacturing costlier than the globe valve.

Gate Valves are built to serve as isolation valves. These valves assist with control the flow of liquid over the pipes. To start or stop the stream flow or other kind of liquid, these valves are connected to the pipelines. Gate valves can be used for various purposes and so they can be seen commonly in homes and commercial centers. Different materials like stainless steel, iron, alloy steel, forged steel etc are widely used to manufacture these valves.

Gate valves are utilized to either halt or start the flow of water. Functioning of gate valves includes the lifting of an circular from the rectangular gate out on the fluid path. When gate valves are open, you will see nothing to obstruct the flow because pipeline diameter and gate share the same opening ball valve . The valve size can be established with this bore diameter.